North West Mesh Reinforcement Stockists

Nationwide Cut & Bent Mesh Specialists

We specialise in the manufacture of cut and bent fabric reinforcement from standard 4.8m x 2.4m sheets to BS8666 to suit customer requirements. Fabric can be bent to the majority of the shapes in BS8666.

Mesh or Fabric reinforcement to BS 4483

Standard sheet size 4.8m long x 2.4m wide, giving a sheet area of 11.52m2

Fabric Reference Nominal Pitch
of Wires		 Wire Sizes Cross Sectional
mm2/m		 Weight
Per m²		 Sheets
Per Tonne		 Sheet
Weight

Main
mm

Cross
mm

Main
mm

Cross
mm

Main
mm

Cross
mm

KG

KG
Square Fabric
200mm x 200mm
A393 200 200 10 10 393 393 6.16 14 70.96
A252 200 200 8 8 252 252 3.95 22 45.5
A193 200 200 7 7 193 193 3.02 29 34.79
*A142 200 200 6 6 142 142 2.22 39 25.57
Structural Fabric
100mm x 200mm
B1131 100 200 12 8 1131 252 10.9 8 125.57
B785 100 200 10 8 785 252 8.14 11 93.77
B503 100 200 8 8 503 252 5.93 15 68.31
B385 100 200 7 7 385 193 4.53 20 52.19
B283 100 200 6 7 283 193 3.73 24 42.97
Long Fabric
100mm x 400mm
**C785 100 400 10 6 785 70.8 6.72 13 77.41
**C636 100 400 9 6 636 70.8 5.55 16 63.94
**C503 100 400 8 6 503 70.8 4.51 19 51.96
**C385 100 400 7 6 385 70.8 3.58 24 41.24
**C283 100 400 6 6 283 70.8 2.78 31 32.03
Wrapping Fabric
D98 200 200 5 5 98 98 1.54 57 17.74
D49 100 100 2.5 2.5 49.1 49.1 0.77 113 8.87

* Also available in 3.6m Long x 2.0m Wide sheets, 50 per bundle.
** These fabrics are not normally held in stock.

North west stockist and nationwide cut & bent fabric specialists

We stock standard size fabric reinforcement sheets and offer a distribution service around the North West from our depot in Wigan.

We also specialise in the manufacture of cut and bent fabric reinforcement from standard sheets to BS8666 to suit customer requirements. Fabric can be bent to the majority of the shapes in BS8666.